.

**NOTICE**

Position Reports can only be sent using a base call sign.

You are about to SUBMIT with a tactical address: [{MsgSender}], and it will not be accepted by the CMS.

Close form and restart under your base call OR you may go ahead and complete the form, then follow instructions below;

Submit when done, select your base call [{CallSign}] using the From: menu in the message window, now Post to the Outbox.

In a few minutes reconnect to the CMS and you will receive a status message on your position, if NO status report then you used a tactical address by error.

GPS Decimal Position Report for Winlink - Decimal Converter


Winlink

Date/Time      Click for current UTC Time

Manually Enter your Decimal Degrees:   Click any where to use
                 
                 (If no connected GPS)         Example: 38.5567, -121.7932  (note the comma)

Comment: Limited to 148 characters

HINT: You will be prompted to save your Position Data BEFORE you Submit. Save the data if you want to DELETE the sent position later. To do so, just use Load Position Data and change the Comment box to DELETE in all caps. Now Submit this new report. It will be deleted from all Winlink System lists and maps, but not APRS FI.

External data if GPS is connected:

Your attached GPS device needs to be configured and working in Winlink Express.
Copy/Paste Current Coordinates converted for use with other mapping programs:
Position in Decimal Degrees:
  		Position in Degrees and Decimal Minutes
 
Position Grid Square
  		Position NATO/MGRS (Military Grid Reference System)
     Format with spaces

THE WINLINK CMS DOES NOT ACCEPT A TACTICAL ADDRESS, ONLY BASE CALLS. - APRS FI KEEPS POSITION REPORTS & COMMENTS FOR 2 YEARS.

                Form Concept from LAX ARES CA                   Current Winlink Sender: Ver 7.2